[Ground-station] How are we set for layout tools?

[John Ackermann]

In my limited experience, all CAD tools suck.  They just suck differently.
For me, at least, KiCad currently sucks less.

Good luck!

73,
John

On Jul 26, 2020, 11:11 PM, at 11:11 PM, Jeffrey Pawlan <pawlan at runbox.com> wrote:
>Thank you both for your suggestions. I especially will check out John's
>specific suggestion.  
>
>I started designing schematics and PCBs under DOS when programs became
>available around 1983. Always doing the custom symbols and footprints
>took many times longer than the actual schematic or board design.
>
>I only mentioned one of a large number of bugs in Eagle that are quite
>irritating so I will look at KiCAD this week.
>
>73,
>
>Jeffrey Pawlan  WA6KBL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openresearch.institute/pipermail/ground-station-openresearch.institute/attachments/20200727/65b086e5/attachment.html>