<div dir="ltr">Quick update on the boardset - we have a volunteer and the RFBitBanger boardset should go out to them today. Thank you to all responding for helping improve this open source amateur radio project! <br><br>If you're just catching up to this email and are interested, then worry not. We'll order a batch of boards after the current round of testing. That larger order will open up more testing and refinement. <br><br>We'd very much like to have a "one stop shop" list of parts to order, long term.<br><br>Steve Conklin handled the most recent parts order. Steve used <a href="https://www.lcsc.com/">https://www.lcsc.com/</a> for the majority of the components, with some parts (toroids, for example) ordered elsewhere. There were some shortages and there were some minimum quantities that we ran into for this successful prototype build. <br><br>This is all run-of-the mill development stuff and not surprising. For the next round of boards the quantities will be larger and we'll have to do some fundraising and/or crowdsourcing. DEFCON sales should help quite a bit, and we have been given the green light for that.<br><br>Thank you to everyone for the support and feedback. We have a great community that produces excellent work. This is only one of many projects that we do. Even if it's not something you're involved with, please spread the word. We survive and thrive only if people know about our work.<br><br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr">-Michelle Thompson<br><br><div dir="ltr"><br></div></div></div></div></div></div></div></div></div><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 5, 2023 at 1:42 PM Michelle Thompson <<a href="mailto:mountain.michelle@gmail.com">mountain.michelle@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">We have an RFBitBanger boardset (main board + display board + parts) that needs to get built. We are looking for an additional person to join the folks testing and refining the design. There's a Slack channel dedicated to this called #rfbitbanger. <br><br>The repository is here:  <a href="http://www.github.com/profdc9/RFBitBanger" target="_blank">http://www.github.com/profdc9/RFBitBanger</a><br><br>We need to test output filters, external computer control (e.g. FT8 support) and the iambic key support. The main board is the one in the video here: <a href="https://youtu.be/cp3MMp09ym4" target="_blank">https://youtu.be/cp3MMp09ym4</a><br><br>The display board was not included in the video because we didn't have any at the time the video was shot. The way that particular main board was put together required some minor modification to fit a display board on. That has been done, along with some initial iambic key work. Updates for that are already in the repository. <br><br>Looking for: volunteer to build and test RFBitBanger<br>What do you do: build, test, advise through participation on Slack<div>What do you get: an RFBitBanger main board and display to keep<br><div><div dir="ltr"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><br>Forward to anyone you think might be interested! <br><br>-Michelle Thompson<br><div dir="ltr">858 229 3399</div></div></div></div></div></div></div></div></div></div></div>
</blockquote></div>