<div dir="ltr">Searching for 6U models for frames. <br><br>There's several 3d models out there of 3U and 6U frames. The ones from Pumpkin are very nice, but you cannot use them for prototyping unless you use Pumpkin kit. <br><br>There's a model of a commercial 6U product that I converted to .stl. The stp file was obtained from <a href="https://www.isispace.nl/product/6-unit-cubesat-structure/">https://www.isispace.nl/product/6-unit-cubesat-structure/</a> and then converted to .stl.<br><br>I have found one 3U frame that we can start working with. <br><br>I put both of these models in the repo at <a href="https://github.com/phase4space/payload-structural" target="_blank">https://github.com/phase4space/payload-structural</a><br><br>There are some NASA models of 3U spacecraft, but they are are in LightWave format (.lwo). LightWave is not free. There's an educational version. It's faculty/student and also not free. There is no home or hobbyist version. <br><br>If you have a copy of LightWave and can export some models to .stp/.stl then <a href="https://nasa3d.arc.nasa.gov/detail/cubesat-icecube" target="_blank">https://nasa3d.arc.nasa.gov/detail/cubesat-icecube</a> and <a href="https://nasa3d.arc.nasa.gov/detail/cubesat-mirata">https://nasa3d.arc.nasa.gov/detail/cubesat-mirata</a> would be good for us to study.<br><br>I have not yet found a model for MarCo. That is a 6U with reflectarray. Anyone have any contacts at JPL they can ask? I will cold call them in a few days if none of you turn anything up. <br><br clear="all"><div><div dir="ltr" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr">-Michelle W5NYV<br><br><div dir="ltr"><br></div></div></div></div></div></div></div></div></div></div>