<div dir="ltr">A 1 MHz wide DVB-S2 signal supports a symbol rate of 800k symbols per second. This is sufficient to carry a virtually error-free transport a payload of a few megabits per second. In terms of communication quality digitized speech, we need a net payload of 1600 - 2400 bits per second per channel. So 1 megabit of net payload is equivalent to more than 400 communication quality voice channels (i.e. better than ssb) or roughly the equivalent of all of the 80,40,20, and 15 bands. <div><br></div><div>The whole idea here is that we are using state of the art digital technologies to transport all of the received uplink channels into a single downlink carrier. The purpose of the commercial testbed channel is to provide an environment for testing the digital DOWNLINK. There will be no analog signals - only digital. The transponder will be combining (or multiplexing) a large number of narrowband digital uplinks into a single downlink. </div><div><br></div><div>Forget analog modes. There is absolutely zero place for analog modulations. Any analog modes will be converted to digital on the ground. </div><div><br></div><div>WU1Y</div><div>Wally</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Aug 24, 2019 at 8:55 AM KC9SGV via Ground-Station <ground-station@lists.openresearch.institute> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hi All, <br>
Is 1 MHz wide enough for DVB-S2 transmissions ?<br>
I cannot attach a picture here, but look on page 17 of this old TAPR paper.<br>
Seems like 2 MHz is the minimum bandwidth required ?<br>
<br>
<a href="https://www.tapr.org/pdf/DCC2009-DATV-KB6CJZ-W6HHC.pdf" rel="noreferrer" target="_blank">https://www.tapr.org/pdf/DCC2009-DATV-KB6CJZ-W6HHC.pdf</a><br>
<br>
Maybe only legacy ham Linear modes will be supported by our 1 MHz Rent-a- GEO effort ?<br>
<br>
Bernard,<br>
KC9SGV<br>
<br>
<br>
Sent from my iPad<br>
</blockquote></div>