<div dir="auto">Later in the summer we usually have at least one tuning party for the 2GHz and Up amateur radio contest. That would be a good opportunity to try on air testing with this channelizer at microwave.</div><div dir="auto"><br></div><div dir="auto">The way the test works is there is a transceiver just outside of near field range. Minimum discernible signal and output gain are the two numbers obtained. For the test it’s usually done serially, everyone using same frequency, one at a time.<br></div><div dir="auto"><br></div><div dir="auto">Channelizer wouldn’t replace that setup, but the event has lots of radios all in one place on all kinds of amateur Microwave bands so we should try and take advantage of it, assuming the channelizer will reliably work by then, and that we can put an SDR up on a pole and at least receive with it. 5GHz and 10GHz are straightforward. Above that, we need more RF RX gear. <br></div><div dir="auto"><br></div><div dir="auto">There is another similar event up in Los Angeles, around the same time. </div><div dir="auto"><br></div><div dir="auto">So, if you have a local Microwave Group that does something similar, and want to test a channelizer, let me know. At the very least would be a fun paper for Microwave Update or GNU Radio Conference. And, an effective amateur radio demo of polyphase channelizers in practice. </div><div dir="auto"><br></div><div dir="auto">-mdt</div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr">-Michelle W5NYV<br><br><div dir="ltr">"Potestatem obscuri lateris nescis."<br></div><div><br></div></div></div></div></div></div></div></div>