<div dir="ltr">We're going to have to pull the cap off of some of those 74AC chips and make sure they're still fabricated the old way, if we end up using them. The hacker community has deep expertise in uncapping chips, and I know just who I'd ask.<div><br></div><div>Vorago has some technical papers regarding their prototype Cubesat controller, below.</div><div>They are using ferroelectric RAM for storage.</div><div><br></div><div><a href="https://www.voragotech.com/products/rhobc1">https://www.voragotech.com/products/rhobc1</a><br></div><div><a href="https://www.voragotech.com/sites/default/files/RH-OBC-1_Flyer_rev_1.1.pdf">https://www.voragotech.com/sites/default/files/RH-OBC-1_Flyer_rev_1.1.pdf</a><br></div><div><a href="https://www.voragotech.com/sites/default/files/RH-OBC-1_schematic.pdf">https://www.voragotech.com/sites/default/files/RH-OBC-1_schematic.pdf</a><br></div><div><a href="http://smallformfactors.mil-embedded.com/articles/designing-rad-hard-cubesat-onboard-computer/">http://smallformfactors.mil-embedded.com/articles/designing-rad-hard-cubesat-onboard-computer/</a><br></div><div><a href="http://www.pumpkinspace.com/store/p199/Vorago_Rad-hard_OBC_%2F_C%26DH_Avionics_Kit.html">http://www.pumpkinspace.com/store/p199/Vorago_Rad-hard_OBC_%2F_C%26DH_Avionics_Kit.html</a><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Jun 3, 2018 at 6:41 PM, Tom Clark <span dir="ltr"><<a href="mailto:tom.k3io@gmail.com" target="_blank">tom.k3io@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
On 6/1/2018 2:19 PM, Bruce Perens via Ground-Station wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Bdale,<br>
<br>
Do you happen to know where there's a copy of Karl's old proposal?<br>
<br>
Finding a viable part is important. There are consumer or industrial parts that we may choose to trust based upon someone else's testing and our understanding of their architecture. The most common seems to be a Microsemi (formerly Actel) part that is reported upon here:<br>
<a href="https://www.hevs.ch/media/document/1/20130612_cof_igloo-for-cubesat_1.pdf" rel="noreferrer" target="_blank">https://www.hevs.ch/media/docu<wbr>ment/1/20130612_cof_igloo-for-<wbr>cubesat_1.pdf</a><br>
This goes to 40 krad.<br>
Parts that are specified as rad-hard seem to start in the $2000s and go up from there. Do you know of less expensive ones?<br>
<br>
</blockquote>
I learned from Jan King (W3GEY) way back in the Microsat (i.e. AO-16) era some 30 years ago that 74AC logic was intrinsically good for ~200+ kRad total dosage and 74HC parts were good to around 100 kRad. The manufacturing processes also rendered plastic 74AC/HC parts to have good intrinsic vibration & thermal reliability.<br>
<br>
Anything that used a charge pump in it went bad at 20-25 kRad, including DRAM and the clock circuitry in a number of small microprocessors.<br>
<br>
We (AMSAT) also did a lot of testing on radiation susceptibility using medical x-ray machines cranked up to levels associated with "the patient is already dead so lets make certain that the remains are sterile";  this including using x-ray machines associated with large animal veterinarians. As I recall some of the testing was done by Stacey  Mills, W4SM and some by Paul ???, VE6???.<br>
<br>
Jan King was a font of information on a lot of Co60 testing done by industry (especially @ Orbital Sciences). That's how we learned about the "magic" of 74AC logic.<br>
<br>
73 de Tom, K3IO<br>
<br>
<br>
<br>
---<br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" rel="noreferrer" target="_blank">https://www.avast.com/antiviru<wbr>s</a><br>
<br>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Bruce Perens K6BP - CEO, Legal Engineering<br>Standards committee chair, license review committee member, co-founder, Open Source Initiative<div>President, Open Research Institute; Board Member, Fashion Freedom Initiative.<br></div></div></div></div></div></div></div>
</div>